Système de serrage automatique

Classification: Système de serrage automatique

FORWELL PRECISION MACHINERY CO., LTD.

Pays: Taïwan

Téléphone: 886-4-8345196

Fax: 886-4-8345197

Personne de contact: Victor Lim

Enquête maintenant

There are a wide range of different models available but the three most popular automatic clamping systems are the TAX Pneumatic Type Clamp System, the TR 90° Rotating Die Clamp and the TS Swing Type Clamp.

Very secure clamping systems
Wide range of different models
Greatly reduces die and mold change times

Before	After
01 Manual Operation	Automation
02 While Die/Mold changing, it takes long time and manpower to tighten.	Only touch the buttons on the control panel.
03 The tightening force will be different by different operators.	The clamping force is the same. Increased safety.
04 Operators waste much manpower, increased injury happened.	By control panel, operators save manpower and decrease injury happened.
05 No alarm notification while the screws are loosing.	With alarm device, the machine will stop immediately.

Forwell specializes in the production of Automatic Clamp Systems with a wide range of models specially designed to fit your dies and plates. With over 20 years experience in the industry you can rest assured that Forwell will deliver the highest quality clamps for your machining operations.
There are a wide range of different models available but the three most popular automatic clamping systems are the TAX Pneumatic Type Clamp System, the TR 90° Rotating Die Clamp and the TS Swing Type Clamp.

TAX Rotating Clamps

The TAX system uses an automatic pneumatic pressure mechanism to individually clamp upper dies. This system is well suited for both smaller and larger hydraulic presses.

Clamp	F	N	P
TAX-4	68	68	24
TAX-6	78	73	16
TAX-10	98	79	6

TR Rotating Clamps

The TR system uses a hydraulic mechanism with a 90° turning movement to lock molds and dies into position. This heavy duty Clamping System is available in three different models with a clamping force up to 16 tons

Proof Pressure	27.0MPa(275kgf/cm2)
Max Working Pressure	18.1MPa(185kgf/cm2)
Working Pneumatic Range	0.4~0.7(4~7kgf/cm2)
Ambient Temperature Range	-5~60°C
Hydraulic Fluid	ISO VG32~VG56

Model	Clamping force(at 185kgf/cm2)	Requited Qrantity(cc.)	A±1	MIN.B	MIN.C
TR-6	6	32.5	40	75	25
TR-10	10	52.5	50	95	30
TR-16	16	84.0	60	110	35

Model	D	E	F	G	J	K	M	N	PT	Q	R
TR-6	112	70	M8*16 Deep	M12*20 Deep	64	30	32	148	1/4	79	22
TR-10	116	70	M14*30 Deep	M14*30 Deep	84	35	40	158	3/8	89	27
TR-16	120	76	M14*35 Deep	M14*35 Deep	99	40	50	168	3/8	94	32

Model	T	U	V	W	X	kg Maxx
TR-6	235	15	61	108	44	20
TR-10	252	16	74	110	49	25
TR-16	267	16	79	115	54	27

TS Swing Type Clamps

The hydraulic drive causes the clamp to swing open and replace the mold, and then it is swung in to clamp the mold.

Proof Pressure	275kgf/cm2
Max Working Pressure	185kgf/cm2
Ambient Temperature Range	-5~60°C
Hydraulic Fluid	ISO VG32~VG5656
Limit switch model	Z-15G-Q-22B
Contact form	Single pole double duty
Voltage	AC125V, 20A DC 30V, 6A6A