PRM-TAIWAN
Classification: Matières premières en plastique
Pays: Taïwan
Téléphone: 886-4-23587676
Fax: 886-4-23587575
Personne de contact: Duke Shih
Enquête maintenant

ISOTHANE TPU resins are high quality environmental friendly materials and available in a wide range of hardnesses in polyester and polyether-based formulations. ISOTHANE exhibit the valuable characteristics of flexible rubber and rigid plastics and their wide spectrum of mechanical properties meet customers’ demands in extensive applications.


ISOTHANE TPU resins portfolio includes high transparency grades, hot melt grades, breathable film grades, anti-static grades, engineering grade, low compression grades, bio-renewable and flame retardant grades.


 ● High Tensile Strength

 ● High Mechanical Property

 ● High Fuel & Oil Resistance

 ● Good Chemical Resistance

 ● Low Temperature Resistance

 ● Excellent Hydrolytic Stability

 ● Bio-compatibility

 ● Resistance To Micro-organism

Item Name HMA Series
Characteristics ISOTHANE® HMA series products are the polyester based hot melt adhesive grade thermoplastic polyurethane having high elasticity and recovery. They exhibit excellent transparency, toughness, and balanced mechanical properties. ISOTHANE® HMA series can be processed by extrusion.
Suggested Applications Heat Transfer Lamination, Hot-Melt Adhesive Film, Textile Lamination, and Fabric Coatings.
Items Units ASTM 1070AU-N 1080AU-L 1080AU-L2 1085AU-N 1090AU-L
Specific Gravity   D-792 1.2 1.22 1.22 1.22 1.22
Hardness Shore A  D-2240 70A 77A 78A 79A 84A
Tensile Strength MPa
psi
D-412 12
1750
8
1200
20
2950
23
3350
24
3500
@ 50% elongation MPa
psi
15
230
4
580
4
580
4
580
5
730
@ 100% elongation MPa
psi
2
300
5
730
5
730
5
730
7
1000
@ 300% elongation MPa
psi
3.5
500
6
880
8
1150
8
1150
10
1450
Elongation @ Break % 900 660 700 700 700
Tear Strength N/mm
lb/in
D-624
DIE C
50
290
60
350
100
570
100
570
110
630
Loading of T fb Test kg   30
Type of die mm   D-1 mm, L=1 mm
Flow Beginning
Temperature (Tfb)
°C   108 88 112 118 138

These property values under specific test conditions as defined in the table above are for reference only.